48
SQW0038
Preparations
Using the [Setup] menu
For details on how to select the [Setup] menu settings, refer to (→31)
[TV Connection] (continued)
■
[HDMI Mode]
Set the format for the HDMI output when playing back on the HDMI compatible high-
definition TV connected with this unit using the HDMI micro cable.
Settings
[AUTO]
Automatically sets the output resolution based on information from a
connected TV.
[4K]
Outputs pictures with a resolution of 3840×2160 pixels using a progressive
scan method for the number of effective scanning lines (2,160 lines).
[1080p]
Outputs pictures using a progressive scan method for the number of effective
scanning lines (1,080 lines).
[1080i]
Outputs pictures using an interlace scan method for the number of effective
scanning lines (1,080 lines).
[720p]
Outputs pictures using a progressive scan method for the number of effective
scanning lines (720 lines).
[576p]
*
1
/[480p]
*
2
Outputs pictures using a progressive scan method for the number of effective
scanning lines (576
*
1
/480
*
2
lines).
*
1
When [Video Out] is set to [PAL]
*
2
When [Video Out] is set to [NTSC]
●
This will work when the HDMI micro cable is connected.
●
If no image appears on the TV with [AUTO], switch the setting to a constant setting other than
[AUTO] to set a format supported by your TV. (Please read the operating instructions for the TV.)
To Next Page
Loading...
