No. SX-DSV02472 -33-
<Backup of electronic gear set value>
The electronic-gear-related objects (6091h-01h, 6091h-02h, 6092h-01h and 6092h-02h) are backup target
objects.
It is recommended to execute a backup (writing into EEPROM) after a change.
By executing a backup, it will be unnecessary to change setting each time when the control power is turned on.
As for the backup method, refer to Section 5-6 “Store parameters (EEPROM writing of objects) (1010h)”.
<Electronic gear setting and backup by object editor>
It is possible to set and back up objects using the object editor of PANATERM.
(2) After the setting, write it into EEPROM.
R1.05
Motor Business Division, Appliances Company, Panasonic Corporation
To Next Page
Loading...
