Panasonic MINAS-A5B Series - Assignment of Output Signal

No. SX-DSV02472 -15-
2-4-2 Assignment of output signal
For the output signals, any functions can be assigned to the output pins of the I/O connector.
Some assignments may be restricted. Refer to (2) [Reallocation of output signal].
(1) Using the default setting
The table below shows default signal allocation.
Note: Default settings of certain model will differ from those shown below. If the default settings shown in Reference
specification SX-DSV02471 are different from values shown below, the settings described in SX-DSV02471
become valid standard default values.
Pin
name
Pin
No.
Applicable
parameter
Default setting
( ): decimal notation
Default Setup
Position/
Full-closed control
Velocity control Torque control
SO1
1
2
Pr 4.10
00030303h
(197379)
BRK-OFF BRK-OFF BRK-OFF
SO2
25
26
Pr 4.11
00101010h
(1052688)
EX-OUT1 EX-OUT1 EX-OUT1
SO3
3
4
Pr 4.12
00010101h
(65793)
ALM ALM ALM
R1.05
Motor Business Division, Appliances Company, Panasonic Corporation