Panasonic PT-FRQ50

Chapter 5 Operations — Using the web control function
ENGLISH - 153
Using the web control function
Following operation is possible from a computer using the web control function.
f
Setting and adjustment of the projector
f
Display of the projector status
f
Sending E-mail messages when there is a problem with the projector
The projector supports “Crestron Connected”, and the following application software of Crestron Electronics, Inc.
can be used.
f
Crestron Fusion
Note
f
Communication with an E-mail server is required to use the E-mail function. Conrm that the E-mail can be used beforehand.
f
“Crestron Connected” is a system of Crestron Electronics, Inc. that collectively manages and controls devices on multiple systems
connected to a network using a computer.
f
For details of “Crestron Connected”, visit the website of Crestron Electronics, Inc. (English only)
URL https://www.crestron.com
Computer that can be used for setting
To use the web control function, a web browser is required. Conrm that the web browser can be used in advance.
OS Compatible browser
Windows Internet Explorer 11.0, Microsoft Edge
Mac OS Safari 11.0/12.0/13.0/14.0/15.0
iOS Safari (version equipped with iOS 11, iOS 12, iOS 13, iOS 14 and iOS 15)
Android Google Chrome (version equipped with Android 7.0/8.0/9.0/10.0/11.0/12.0)
Accessing from the web browser
1) Start up the web browser on the computer.
2) Enter the IP address set on the projector into the URL entry field of the web browser.
f
If the user name and password of the administator account have been set on the initial setting screen
(
x
page 47) or in the [NETWORK] menu
→
[ADMINISTRATOR ACCOUNT] (
x
page 139) , proceed to
Step
7)
.
f
The [Set up password] page is displayed if the administrator account has not been set.
3) In [User name], enter the user name of the administrator account.
f
The factory default setting of user name is "dispadmin".
4) In [Password], enter the password of the administrator account.
f
The password cannot be blank.
f
A password consisting of at least eight single-byte characters is recommended.
f
A password consisting of at least three of the following four character types is recommended.
g
Uppercase letters
g
Lowercase lettters
g
Digits
g
Symbols (~!@#$%^&*()_+\|}{][<>.,/?`)
5) In [Password(Retype)], re-enter the password entered in Step 4).