Panasonic PT-FRQ50

Chapter 5 Operations — Using the web control function
156 - ENGLISH
[Status]
[Remote preview lite] page
The input image to the projector can be simply viewed on the web control screen.
Click [Status] → [Remote preview lite].
1
2
3
4
5
6
7
8
9
10
11
12
13
SN1234567
14
15
SN1234567
1 Preview window
Simply displays the image corresponding to the input image to
the projector.
Color of the outside border of the preview window indicates the
projection status from the projector.
Red:
Image from the projector is not projected.
Green:
Image from the projector is being projected.
2 [INPUT SELECT]
Displays the operation menu for switching input.
For details, refer to “Switching the input” (
x
page 158).
3 [STATUS]
Displays the status of the projector.
4 [SHUTTER]
Displays the status of the shutter.
5 [POWER]
Displays the status of the power.
6 [OSD]
Displays the status of the on-screen display function.
7 [PROJECTOR TYPE]
Displays the type of the projector.
8 [SERIAL NUMBER]
Displays the serial number of the projector.
9 Signal information
Displays the signal information of the selected input.
10 [INTAKE AIR]
Displays the intake air temperature status.
11 [GEOMETRY]
Displays the setting of the [POSITION] menu → [GEOMETRY].
12 [LIGHT SOURCE]
Displays the illumination status (icon) and the runtime of the light
source.
13 [ERROR]
Displays the occurrence status of error/warning in icon.
This will be blank if there is no occurrence of error/warning.
14 [Pre-Show Mode]
Switches the Pre-Show mode.
In the Pre-Show mode, the input image to the projector can be
viewed without projecting even if the projector is in the standby
status.
[Pre-Show Mode] is not displayed in the projection mode.
15 [Detail]
A button is displayed when there is an occurrence of error/
warning.
Click “Error information page” (
x
page 159) to display.
Note
f
The power indicator <ON (G)/STANDBY (R)> blinks in red in frequency of 2.95 seconds illuminating → 0.25 seconds o󰀨 during the Pre-
Show mode.
f
The runtime in [PROJECTOR RUNTIME] continues to add up even if the projector is in the standby status while in the Pre-Show mode.
f
In case of this projector, the input image to the projector can be displayed in the preview window in simplied manner even if [Detailed set
up] → [HTTPS set up] → [Connection] is set to [HTTPS]. However, it may not be displayed depending on the web browser in use when the
self-signed certicate is used as the security certicate to be used for the HTTPS communication.
f
There are following restrictions on the image to be displayed in the preview window.
g
The adjustment results for each item in the [PICTURE] menu, [POSITION] menu, and [ADVANCED MENU] menu are not reected.
However, some of the items such as [CONTRAST], [BRIGHTNESS], or [SHIFT] are reected.
g
When an image is projected with a di󰀨erent aspect ratio from the input image using [ASPECT] or [ZOOM], the image may be displayed
with a di󰀨erent aspect ratio from the actual projected image.
g
The e󰀨ects set in [BACK COLOR] or [STARTUP LOGO] are not reected.
f
The test pattern built-in to the projector is displayed in the preview window if it is being projected.