Panasonic PT-FRQ50

Chapter 1 Preparation — Precautions for use
20 - ENGLISH
f
Do not install the projector in a conned space.
When installing the projector in a conned space, provide air conditioning or ventilation separately. Exhaust heat
may accumulate when the ventilation is not enough, triggering the protection circuit of the projector.
f
Panasonic takes no responsibility for any damage to the product caused by an inappropriate choice of location
for installing the projector, even if the warranty period of the product has not expired.
Security
When using this product, take safety measures against the following incidents.
f
Personal information being leaked via this product
f
Unauthorized operation of this product by a malicious third party
f
Interfering or stopping of this product by a malicious third party
Take su󰀩cient security measures.
f
Make your password di󰀩cult to guess as much as possible.
f
Change your password periodically.
f
Panasonic Corporation or its a󰀩liate companies will never ask for your password directly. Do not divulge your
password in case you receive such inquiries.
f
The connecting network must be secured by a rewall, etc.
r
Security when using the wireless LAN product
The advantage of a wireless LAN is that information can be exchanged between a computer or other such
equipment and a wireless access point using radio waves, instead of using a LAN cable, as long as you are within
range for radio transmissions.
On the other hand, because the radio wave can travel through an obstacle (such as a wall) and is accessible from
anywhere within a given range, following problems may occur if security setting is insu󰀩cient.
f
Transmitted data may be intercepted
A malicious third part may intentionally intercept radio waves and monitor the following transmitted data.
g
Personal information such as your ID, password, credit card number
g
Content of an Email
f
Illegally accessed
A malicious third party may access your personal or corporate network without authorization and engage in the
following types of behavior.
g
Retrieve personal and/or secret information (information leak)
g
Spread false information by impersonating a particular person (spoong)
g
Overwrite intercepted communications and issue false data (tampering)
g
Spread harmful software such as a computer virus and crash your data and/or system (system crash)
Since most wireless LAN adapters or access points are equipped with security features to take care of these
problems, you can reduce the possibility of these problems occurring when using this product by making the
appropriate security settings for the wireless LAN device.
Some wireless LAN devices may not be set for security immediately after purchase. To decrease the possibility
of occurrence of security problems, be sure to make all security related settings according to the operation
instructions supplied with each wireless LAN device before using a wireless LAN device.
Depending on the specications of the wireless LAN, a malicious third party may be able to break security settings
by special means.
Panasonic asks customers to thoroughly understand the risk of using this product without making security settings,
and recommends that the customers make security settings at their own discretion and responsibility.
Notes regarding the wireless LAN
Radio wave in the 2.4 GHz band is used when the wireless LAN connection function of the projector is used. The
license of wireless station is not required, but understand the following when using.
To use the wireless LAN function with the projector, it is necessary to attach the optional Wireless Module (Model
No.: AJ-WM50 Series).
r
Do not use close to other wireless devices.
Following devices may be using radio wave in the same bandwidth as the projector. Using the projector close to
these devices may cause the communication to be disabled or the communication speed to slow down due to
interference of radio wave.