Panasonic PT-FRQ50

Chapter 5 Operations — Using the web control function
ENGLISH - 175
[Network security] page
Make settings to protect the projector from external attacks via LAN and unauthorized use.
Click [Detailed set up]
→
[Network security].
1
2
1 [COMMAND PROTECT]
Make settings for the connection authentication when using the
command control function.
[DISABLE]:
Connect to the projector in non-protected mode.
Connection authentication is not performed.
[ENABLE]:
Connect to the projector in protected mode.
The user name and password of the administrator account are
required for the connection authentication.
2 [Submit]
Updates the setting.
If you click [Submit] with [DISABLE] selected in [COMMAND
PROTECT], a conrmation screen will be displayed. Click [OK]
on the conrmation screen to update the settings.
Note
f
When [COMMAND PROTECT] is set to [DISABLE], connection authentication is not performed, making it vulnerable to threats on the
network. Be aware of the risks before making settings.
f
For details on how to use the command control function, refer to "Control commands via LAN". (
x
page 202)
[Set up password]
[Set up password] page (for administrator account)
Click [Set up password].
1
2
4
3
1 [Administrator]
Used to change the setting of the administrator account.
2 [User]
Used to change the setting of the standard user account.
3 [PJLink]
Used to change the setting of the PJLink account.
4 [Next]
Used to change the setting of the password.