Chapter 4 Settings — [PICTURE] menu
70 - ENGLISH
Note
f
In the following cases, the gamma mode is automatically set based on the InfoFrame information while displaying the image with the
InfoFrame information added, so the gamma mode cannot be selected. If the information necessary for supporting HDR (High Dynamic
Range) is not included in the InfoFrame information added to the displayed image signal, it will follow the [GAMMA] setting.
g
When the [DISPLAY OPTION] menu → [HDMI1 IN] / [HDMI2 IN] → [AUTO GAMMA SELECT] is set to [ENABLE], and the HDMI input is
selected
g
When the [DISPLAY OPTION] menu → [DIGITAL LINK IN] → [AUTO GAMMA SELECT] is set to [ENABLE], and the DIGITAL LINK input
is selected
Setting [HDR HLG SYSTEM GAMMA]
Set the system gamma to be applied to the [USER] and [HDR HLG] gamma modes. This system gamma is
dened by the ITU-R BT.2100 standard.
1) Press
as
to select [GAMMA].
2) Press
qw
or the <ENTER> button.
f
The
[GAMMA]
individual adjustment screen is displayed.
3) Press
qw
to select [USER] or [HDR HLG], and press the <ENTER> button.
f
The
[GAMMA]
screen is displayed.
f
When [HDR HLG] is selected, proceed to Step
5)
.
4) Press
as
to select [HDR HLG SYSTEM GAMMA].
5) Press
qw
to switch the item.
f
The items will switch each time you press the button.
f
[1.00] - [1.62] can be set in increments of 0.01.
Changing the name of [USER]
1) Press
as
to select [GAMMA].
2) Press
qw
or the <ENTER> button.
f
The
[GAMMA]
individual adjustment screen is displayed.
3) Press
qw
to select [USER].
4) Press the <ENTER> button.
f
The
[GAMMA]
screen is displayed.
5) Press
as
to select [GAMMA NAME CHANGE].
6) Press the <ENTER> button.
f
The
[GAMMA NAME CHANGE]
screen is displayed.
7) Press
asqw
to select the text, and press the <ENTER> button to enter the text.
8) Press
asqw
to select [OK], and press the <ENTER> button.
f
The selected gamma name is changed.
Note
f
When a name is changed, display of [USER] is also changed.
[DAYLIGHT VIEW]
You can correct the image to the optimal vividness even if it is projected under a bright light.
1) Press
as
to select [DAYLIGHT VIEW].
2) Press
qw
or the <ENTER> button.
f
The
[DAYLIGHT VIEW]
individual adjustment screen is displayed.
To Next Page
Loading...
