Panasonic PT-FRQ50

Chapter 4 Settings — [PICTURE] menu
ENGLISH - 73
Set according to the following steps to reproduce more faithful, sRGB compliant colors.
1) Set [COLOR MATCHING] to [OFF].
f
Refer to [COLOR MATCHING] (
x
page 88).
2) Display the [PICTURE] menu.
f
Refer to “[PICTURE] menu” (
x
page 66).
3) Press
as
to select [PICTURE MODE].
4) Press
qw
to set [REC709].
5) Press
as
to select [GAMMA].
6) Press
qw
or the <ENTER> button.
f
The
[GAMMA]
individual adjustment screen is displayed.
7) Press
qw
to select [2.2].
8) Press
as
to select [COLOR].
9) Press the <DEFAULT> button on the remote control to set the factory default setting.
10) Follow Steps 8) to 9) to set [TINT], [COLOR TEMPERATURE], [WHITE GAIN], and [DAYLIGHT VIEW] to
the factory default settings.
Note
f
sRGB is available for RGB signal input only.