Panasonic PT-RS30K

DIS-29
SECTION 2 DISASSEMBLY PROCEDURES
<RZ31K/RS30K>
A
2. 26. Mirror block removal
1. Remove the lighting block 2 following to step [2.15. Lighting block 2 removal].
2. Remove the DMD block following to step [2.23. DMD block removal].
3. Unscrew 5 screws-A and remove the mirror block.
WOB frame & shutter
block
Lens shift unit Focus motor
Focus motor
[Mounting of WOB frame]
• Make sure that the dust proof rubber of the WOB frame should be mounted on the flange of lens mount.
OK NG
[Note]
• When you move the Lens shift unit manually, you should
take the lens calibration. Refer to section 3 "Lens cali-
bration" for further instructions.
[How to remove the WOB frame & Shutter block]
• Move the Lens shift unit to the front end.
Insert the flat driver into the groove of focus motor on the
Lens shift unit. Turn it in the counter-clockwise to move the
Lens shift unit to the front end.
Mirror block
A