Panasonic PT-RS30K

SECTION
3
ADJ-1
CONTENTS
1. Adjustment item and procedure ............................ADJ-2
1. 1. Lighting area adjustment
1. 2. Convergence adjustment
1. 3. EEPROM data transfer
1. 4. Lens calibration
1. 5. Model information setup
1. 6. Clog sensor calibration
1. 7. Date and time setup
1. 8. LD unit runtime reset
1. 9. LD unit status reset
2. Firmware update procedure
............................... ADJ-18
(2017-02)
SECTION 3 ADJUSTMENTS
Illustrations of the projector and other parts may vary from the actual product.