Panasonic PT-RS30K

ADJ-11
SECTION 3 ADJUSTMENTS
<RZ31K/RS30K>
1. 4. Lens calibration
1. Select sub menu [LENS CALIBRATION] of [PROJECTOR SETUP] menu.
2. Select the used lens type.
• NORMAL : When using the other than ET-D75LE95
• D75LE95 : When using the ET-D75LE95 (ultra short throw lens)
PROJECTROR SETUP 2/3
DATE AND TIME
SCHEDULE
NORMAL
OFF
OFF
DEFAULT
MULTI PROJECTOR SYNC
RS-232C
REMOTE2 MODE
FUNCTION BUTTON
LENS CALIBRATION
LENS MEMORY
STATUS
AC VOLTAGE MONITOR
FILTER SETTING
SAVE ALL USER DATA
CHANGE
SET
ENTER
D75LE95
LENS CALIBRATION
3. A confirmation message is displayed and select [OK].
LENS CALIBRATION
OK CANCEL
CHANGE
EXECUTE
ENTER
Proceed LENS CALIBRATION,
and return to HOME POSITION.
4. The lens will move vertically/horizontally and backward/frontward to detect the limit value of the lens shift and focus, and
setup the home position automatically.
5. After finishing the calibration, the main menu will be displayed.
1. 5. Model information setup
1. Enter the service mode, and select submenu [MODEL] of [EXTRA OPTION]
menu.
2. Select the model and press the [ENTER] button.
3. The model information will be applied after the main power restart.
4. Confirm the model information in the sub menu [STATUS] of the menu [PRO-
JECTOR SETUP].
MODEL
WUXGA :RZ31K
SXGA+ :RS30K
D WUXGA :RZ31KD
SXGA+ :RS30KD
J WXGA :RZ31KJ
SXGA+ :RS30KJ
C WUXGA :SRZ31KC
SXGA+ :SRS30KC
MENU SELECT
SET
ENTER