DIS-1
SECTION
2
(2017-02)
SECTION 2 DISASSEMBLY PROCEDURES
CONTENTS
1. Parts Locations ...........................................DIS-2
1. 1. Electrical parts location (P.C.Boards)
1. 2. Electrical parts location (Fans)
1. 3. Electrical parts location (Cooling Pumps)
1. 4. Electrical parts location (Sensors)
1. 5. Mechanical parts location
1. 6. Optical parts location
2. Disassembly Instructions
...................................DIS-6
2. 1. Fine coaxial cable connector
2. 2. Projection lens removal
2. 3. Top cover (F)/(R) removal
2. 4. Front cover and Rear cover removal
2. 5. Side cover (L)/(R) removal
2. 6. Signal block removal
2. 7. Power PB block removal
2. 8. Frames removal
2. 9. Exhaust fan block removal
2. 10. LD driver block removal
2. 11. Power PF block removal
2. 12. Frame (R) removal
2. 13. PW fan, radiator fan block removal
2. 14. Rod ass'y removal
2. 15. Lighting block 2 removal
2. 16. Liquid cooling unit 2 removal
2. 17. LD unit 2 removal
2. 18. Phosphor wheel 2 removal
2. 19. Lighting block 1 removal
2. 20. Liquid cooling unit 1 removal
2. 21. LD unit 1 removal
2. 22. Phosphor wheel 1 removal
2. 23. DMD block/liquid cooling unit removal
2. 24. Engine exhaust fans, DMD cover bottom removal
2. 25. Mechanical shutter removal
2. 26. Mirror block removal
2. 27. Lens mount block removal
<Reference> Wiring connection
Illustrations of the projector and other parts may vary from the actual product.