Panasonic PT-RS30K

DIS-25
SECTION 2 DISASSEMBLY PROCEDURES
<RZ31K/RS30K>
A
C
D
B
PW cover
Phosphor wheel 1
PW support metal
Torque: 70±10 N•cm
A
B
C D
[Note on mounting]
• Dress the FPC cable from the Phosphor wheel as the black line
marker on the cable comes to the edge of the Lighting case.
FPC cable
Black line
2. 22. Phosphor wheel 1 removal
1. Unscrew 1 torx screw-A, 5 screws-B and remove the PW cover.
2. Unscrew 2 screws-C and remove the PW support metal upward.
3. Unscrew 2 screws-D and remove the phosphor wheel 2 upward.
[Note] • Pull up the Phosphor wheel carefully not to touch the Lighting case.
• Do not touch the phosphor surface of Phosphor wheel.