Panasonic PT-RS30K

DIS-28
SECTION 2 DISASSEMBLY PROCEDURES
<RZ31K/RS30K>
2. 24. Engine exhaust fans, DMD cover bottom removal
C
D
A
B
Exhaust engine fans block
DMD cover bottom
A
2. 25. Mechanical shutter removal
1. Unscrew 2 screws-A and remove the WOB frame & Shutter block. (Pull the block upward on slant.)
[Note] • It is not possible to remove the WOB frame block because a part of lens shift unit blocks the removing. To remove
the WOB frame block, move the Lens shift unit to the front end and then remove it. (When moving the Lens shift
manually, the lens calibration should be performed after fixed.)
Mechanical shutter unit
2
1
2
Engine
exhaust 2 fan
Engine
exhaust 1 fan
Color sensor
unit
Ball point driver
4
A
C
B
D
1. Loosen 2 screws-A, unscrew 1 screw-B and remove the engine exhaust fan
block.
2. Loosen 2 screws-C, unscrew 2 screws-D and remove the DMD cover bot-
tom.
A
WOB frame & shutter
block