Panasonic PT-RS30K

INF-13
SECTION 1 SERVICE INFORMATION
<RZ31K/RS30K>
3. Service Mode
This projector has Service Mode in addition to standard on-screen menus (User Mode).
This mode enables some menu settings for the service operation.
3. 1. Setting to Service Mode
1. Press the [MENU] button on the control panel of the projector or on the remote controller to display the main menu on the
screen.
2. Select a sub menu "service password" of the main menu "projector setup" and press the [ENTER] button.
3. Input the password "1565" by remote controller and press the [ENTER] button.
4. Press the [MENU] button. "SERVICE MODE" (MAIN MENU) will be displayed.
3. 2. Resetting to User Mode
1. Press the [MENU] button on the control panel of the projector or on the remote controller to display the main menu.
2. Select a sub menu "service password" of the main menu "projector setup" and press the [ENTER] button.
3. Input the password "0000" by remote controller and press the [ENTER] button.
4. Press the [MENU] button. "USER MODE" (MAIN MENU) will be displayed.
3. 3. Functions of Service Mode
* Function varies according to a version of the main microcomputer software.
3. 3. 1. EXTRA OPTION
"EXTRA OPTION" is added to the bottom of the main menu.
SERVICE PASSWORD
INPUT
SET
ENTER
SERVICE PASSWORD
SERVICE MODE
RETURN
MENU
SERVICE PASSWORD
INPUT
SET
ENTER
SERVICE PASSWORD
USER MODE
RETURN
MENU
1. DYNAMIC GAMMA MODE
• Setting of the DYNAMIC GAMMA operation.
- ON : Enable the Dynamic gamma function. (Default setting)
- OFF : Disable the Dynamic gamma function.
EXTRA OPTOPN
DYNAMIC GAMMA MODE
3DCMS
SHUTTER KEEP
ON
ON
OFF
SELF CHECK
POWER OFF MESSAGE
ERROR OSD
ELECTRICAL CONVERGENCE
MECHANICAL CONVERGENCE
MODEL
CLOG SENSOR CALIBRATION
LIGHT ADJUST
INDICATOR SETTING
MENU SELECT
SUB MENU
ENTER
1.
8.
7.
5.
3.
4.
6.
9.
10.
11.
2.