Panasonic PT-RS30K

DIS-18
SECTION 2 DISASSEMBLY PROCEDURES
<RZ31K/RS30K>
[RF]-P.C.Board
[RF]-P.C.Board
Radiator 8 fan
Radiator 2 fan
Radiator 7 fan
Radiator 1 fan
Radiator 12
fan
Radiator 6 fan
Radiator 10 fan
Radiator 4 fan
Radiator 11
fan
Radiator 5
fan
Radiator 9 fan
Radiator 3 fan
Ball point driver
Radiator fan block (R)
2
12
2
12
Ball point driver
B
A
C
C
2. 13. PW fan, radiator fan block removal
1. Unscrew 2 screws-A, 2 screws-B and remove the partition sheet and PW fan block.
2. Unscrew each 3 screws-C and remove the radiator fan blocks (F) and (R)
[Note on mounting]
1. Mount the fans not to nip the lead wires from the fans.
2. Mount the fans to match the marker (w) (shown in the
figure) and groove where the lead wires from the fan are
taken off.
Partition sheet
PW fan block
Radiator fan block (F)
PW 2 fan
PW 1 fan
A
B
C
4