INF-20
SECTION 1 SERVICE INFORMATION
<RZ31K/RS30K>
4. [PROJECTOR SETUP] menu
(1) The following two items are added to the sub-menu.
"COOLING CONDITION"
- Fan control can be set manually. (Usually set to [AUTO].)
"HIGH ALTITUDE MODE"
- Altitude can be set manually. (Usually set to [AUTO].)
(2) In the [BRIGHTNESS CONTROL STATUS] sub menu, [DETAILED INFORMATION] is displayed by pressing the [ENTER]
key. The detailed information of brightness control can be checked.
(3) [SHUTTER COUNTER] is added in sub menu [INITIALIZE].
- Initialize the count if replaced the mechanical shutter.
To Next Page
Loading...
