62
Caution : During assembling, ensure the IR P.C.B. is seated
properly on the locator.
Step 5 : Upset the IR P.C.B..
Step 6 : Detach 10P FFC at the connector (CN300) on the IR
P.C.B..
Step 7 : Remove the IR P.C.B. and iPod/iPhone Switch P.C.B..
9.34. Disassembly of Motor P.C.B.,
Door Switch P.C.B. and Inter-
lock Switch P.C.B.
• Refer to “Disassembly of Stand Unit”.
• Refer to “Disassembly of CD Door Assembly”.
• Refer to “Disassembly of Net Frame Assembly”.
• Refer to “Disassembly of Front Panel Block”.
• Refer to “Disassembly of Panel P.C.B.”.
Step 1 : Lift up the himelon.
Caution : Replace the himelon if they are torn during disas-
sembling.
Step 2 : Remove 2 screws.
Step 3 : Lift up the Gear Box Assembly as arrow shown.
To Next Page
Loading...
