26
7.4. Sales Demonstration Lock Function Mode
7.4.1. Setting
Here is the procedures to enter into Sales Demonstration Lock.
Step 1 : Turn on the unit.
Step 2 : Select to iPod / mode.
Step 3 : Press and hold [ ] button follow by [ ] button on the unit for 5 sec.
Step 4 : The display will show upon entering into this mode.
Note : button is invalid and the main unit displays “LOCKED” while the lock function mode is entered.
7.4.2. Cancellation
Step 1 : Select to [CD / ] (CD mode).
Step 2 : Set to Volume 19.
Step 3 : Press and hold [ ] button follow by [ ] button on the unit for 5 sec.
Step 4 : The display will show after exit from this mode.
To Next Page
Loading...
