36
Step 3 : Slightly lift up the Front Panel Block.
Step 4 : Detach 15P FFC at the connector (CN381) on the Ver-
tical Main P.C.B..
Step 5 : Detach 25P FFC at the connector (CN900) on the Ver-
tical Main P.C.B..
Step 6 : Remove Front Panel Block.
9.8. Disassembly of Top Ornament
Unit
• Refer to “Disassembly of Stand Unit”.
• Refer to “Disassembly of CD Door Assembly”.
• Refer to “Disassembly of Net Frame Assembly”.
• Refer to “Disassembly of Front Panel Block”.
Step 1 : Lift up the himelons.
Step 2 : Remove 4 screws.
Caution : Replace the himelons if they are torn during dis-
assembling.
Step 3 : Lift up the Top Ornament Unit.
Caution : Avoid applying strong force to pull the Top Orna-
ment Unit or it may lead to the broken of connecting cable.
To Next Page
Loading...
