Panasonic SL-VGU1-C

15
Chapter 1
System Outline
Making of Branch Lines Using Cable Connectors
You can make branch lines using connectors and terminal blocks. In addition, for this product, you can use ca-
bles connectors commercially available.
The exclusive hook-up connectors can connect the exclusive 4-core at cables only.
CAUTION
Exclusive 4-core at cable
4-core VCTF cable commercially available
(non-shielded) (Note)
Exclusive 4-core at cable
Making of 'T' - branch line using exclusive hook-up
connector
SL-J1A ... 1
Junction connector commercially available or junc-
tion terminal block commercially available
Extension using exclusive hook-up connector
SL-J3A ... 2
Connection of branch line using exclusive hook-up
connector
SL-JK1 and SL-CP3 ... 3
SL-JK and SL-CP3 ... 4
4-core VCTF cable com-
mercially available
(non-shielded) (Note)
Junction connector commercially available ... 5
Junction terminal block commercially available ... 6
Junction connector commercially available or junc-
tion terminal block commercially available
Note: Use the same diameter cables.
Note: The VCTF cable is the vinyl cabtyre cable that conforms to the requirements of JIS C 3306 ‘Polyvinyl chloride insulated exible cords.’
Junction connector
Junction connector
Junction terminal block
SL-J1A
SL-J1A
SL-JK1
SL-J3A
SL-VEU
SL-CP3
SL-CP3
SL-JK
1
2
1
3
4
6
5