Panasonic SL-VGU1-C

27
Chapter 2
Cable Connection
CC-Link Terminal Block Connector (8-Pole)
Connection diagram
Connection to
'SL-VGU1-C'
DA
8
7
6
5
4
3
2
1
Mounting screw
Mounting screw
DB
DG
S
Be careful not to cause short-circuit with any adjacent terminal.
Be sure to ground the shielded wire of the CC-Link cable.
Whenever necessary, extend the cable using crimp-style terminals, etc.
CAUTION
Terminal arrangement
No. Designation Description
8
DA Comprises of two terminals for cascade wiring.
7
6
DB Comprises of two terminals for cascade wiring.
5
4
DG Comprises of two terminals for cascade wiring.
3
2
S
Connect the shield wire of the CC-Link cable to one terminal,
and ground the other terminal.
1
Note: In case SL-VGU1-C is the end terminal of CC-Link, connect the termination resistance between DA and DB.
However, as the termination resistance is not supplied, please arrange it separately.
● Applicable terminal block connector
EC381VM-08P (manufactured by Dinkle Enterprise, Co., Ltd.)