Panasonic SL-VGU1-C

26
Chapter 2
Cable Connection
Before connecting the cables, be sure to turn off the power.
CAUTION
Use the terminal block connectors for connection of the S-LINK V system side and CC-Link side.
Insert the cable lead wires into the terminal block connector, and then tighten the screws using a screwdriver.
S-LINK V Terminal Block Connector (8-Pole)
Connection diagram
Be careful not to cause short-circuit with any adjacent terminal.
Connection to
'SL-VGU1-C'
Mounting screw
Mounting screw
8
7
6
5
4
3
2
1
S-LINK V terminal
block connector
Lead wire
Error output
Frame
ground
Black
Load
ERR
G
D
0V
24V
0V
24V
FG
White
Blue
Brown
24V DC %
+10
-5
－
＋
Terminal arrangement
No. Designation Wire color / Description
8 ERR Error output
7
Main line
G Black
6 D White
5 0V Blue
4 24V Brown
3
Input
0V
External power supply input
2 24V
1 FG Frame ground
● Applicable terminal block connector
2ESDVM-08P (manufactured by Dinkle Enterprise Co., Ltd.)