7
Before Using This System
Introduction
Instructions for Safe Use
The S-LINK V system does not have any control functions, such as accident preventive function and
safety function. For this reason, do not use the S-LINK V system if malfunction of the system may af-
fect human lives or assets.
Even if this system is not used as an accident preventive system or safety system, if this system is
used for a nuclear power control system, railroad facility, aviation facility, vehicle, combustion system,
medical equipment, or the like, be sure to design a system having enough capacity, and adopt safety
measures for the system, such as a fail-safe function. In addition, please contact our sales division.
WARNING
Ambient conditions
Do not use this system at the following places:
Place where the ambient tem-
perature is out of the specied
range of 0 to +55°C (Note)
Note: If this product is incorpo-
rated in the control box
together with the other
unit, the unit may generate
heat to change the ambient
temperature. In this case,
install a cooling fan so that
the ambient temperature
cannot exceed the rated
upper limit temperature.
Place where the temperature
extremely varies and dew
condensation may be caused
Place where the ambient hu-
midity is out of the specified
range of 10 to 90% RH
COR-
ROSIVE
GAS
FLAM-
MABLE
GAS
Place where there is a corro-
sive or ammable gas
Steamy or dusty place or
place near water, oil, or
chemical source
Place where vibration or
shock of more than the speci-
ed level may be directly ap-
plied to the system main body
Place where direct sunlight
may enter
Closed place
However, if a ventilation
hole or a fan is installed,
such a place can be used.
To Next Page
Loading...
Need help?
General
