Panasonic SL-VGU1-C

52
Chapter 2
Starting
Mode setting Operation Description / Function Indication
I/O setting 0
Press key. Displays the I/O setting value of '0' (addresses 0 to 127). Example
Press ENTER key. Blinks the displayed I/O setting value of '0'.
If addresses 0 to
127 are set as
inputs:
Press key or key.
Selects I/O setting 0, and displays the set data.
96 to 127
Output
Input
64 to 95
32 to 63
0 to 31
I/O setting 0
If addresses 0
to 31 are set as
inputs, addresses
32 to 63 are set
as outputs, and
addresses 64 to
127 are set as
inputs:
Press ENTER key. Determines the set data of I/O setting 0. Example
I/O setting 1 to 3
Follow the same operation
procedure as I/O setting 0.
The I/O setting will be
switched in the order of 1
to 3.
Same as I/O setting 0
I/O setting 2
352 to 383
Output
Input
320 to 351
288 to 319
256 to 287
I/O setting 2
I/O setting 1
224 to 255
Output
Input
192 to 223
160 to 191
128 to 159
I/O setting 1
I/O setting 3
480 to 511
Output
Input
448 to 479
416 to 447
384 to 415
I/O setting 3
Same as I/O setting 0
Displaying number of stations
Press key.
Displays the number of CC-Link stations.
1 station 2 station 3 station 4 station
If the number of I/O control points, I/O setting data, buffer
memory assignment data are not set properly, a setting
error may be caused.
Example
If a setting error is
caused:
Output hold / clear
Press key. Displays the output hold / clear. Example
Press ENTER key. Blinks the displayed output hold / clear.
If the output hold
is selected:
Press key or key. Selects either the output hold or the output clear.
If the output clear
is selected:
Press ENTER key.
Determines the output hold or the output clear.
(For a detailed description, refer to page 54.)
Example