Panasonic TH-50PH9UK - Removal of the Plasma Panel

6.21. Removal of the Plasma Panel
1. Disconnect the Fan Relay Couplers.
2. Remove 3 screws each (
) and then remove the 3 Fan
Blocks.
3. Remove 4 screws each (
) and then remove the Stand
Black(L, R).
4. Remove 1 screws each (
) and then remove the
Speaker Terminal Black(L, R).
5. Disconnect the couplers(J1, J2, J3, J4, J5, J6, J7, J8, J10,
J15, J30).
6. Remove the 4 screws and then remove the Slot Block.
7. Disconnect the coupler(DA5).
8. Remove the Flexible Cable from the coupler(DA2).
9. Remove the 4 screws and then remove the DA-Board
Block.
10. Disconnect the couplers(P2, P9, P11, P12, P23, P25).
11. Remove the 6 screws (
) and then remove the P-Board.
12. Disconnect the coupler(D20).
13. Remove the Flexible Cable from the couplers(D31, D32,
D33, D34).
14. Remove the 4 screws and then remove the D-Board.
15. Remove the Flexible Cable from the couplers(SU1, SU2,
SU3, SU4, SD1, SD2, SD3, SD4).
16. Remove the 6 screws.
17
TH-50PH9UK