Panasonic TH-50PH9UK - Page 19

31. Remove the 22 screws
32. Remove the Flexible Cable from the couplers(CB1, CB2,
CB3, CB4, CB5, CB6, CB7, CB8, CB9, CB10, CB11).
33. Remove the Flexible Cable from the couplers(C41, C42,
C50, C51).
34. Remove 5 screws each and then remove the C4-Board,
the C5-Board and the C6-Board.
35. Remove the 2 screws and then remove the S1-Board Block.
36. Remove the 3 screws and then remove the AC-Inlet Block.
37. Remove the 2 screws of the Escutcheon.
38. Pull the bottom of the Plasma Panel forward (arrow1).
39. Slide the Plasma Panel and then remove the Plasma Panel
(arrow2).
19
TH-50PH9UK