39
QR34642
Attaching Battery Pack to DVD Palmcorder
1 Fit the battery pack to the battery attachment
platform on this DVD Palmcorder and slide it
upward until a click is heard.
Note:Note:
• Make sure that the battery pack is in the correct
orientation.
• Make sure that the battery pack is securely attached:
Incomplete attachment could cause the battery pack to
fall, resulting in damage.
Removing Battery Pack
After using the DVD Palmcorder, remove the battery pack from it.
1 Slide the BATTERY EJECT switch on the bottom
of DVD Palmcorder: The battery pack can be
removed.
Note:Note:
• For safety, be sure to turn the DVD Palmcorder off before
attaching or removing the battery pack.
• Be careful not to drop the removed battery pack.
• If the battery remains attached, minute level current will
flow even if the DVD Palmcorder is off, and the battery
pack will discharge.
Ter minal
must
face up.
1
2
VDR-M30PP_GB.book Page 39 Friday, March 14, 2003 8:53 PM
To Next Page
Loading...
