Panasonic VDR-M30 - Switching Quality of Still Image (Quality)

89
QR34662
Block-like noise may appear in recorded image, or the outline of subject image is distorted under the
recording conditions listed below: Pan the DVD Palmcorder as slowly as possible. (Block noise is likely
to appear in the “STD”):
• If there is a complicated pattern in background (as in following figure on left)
• If the DVD Palmcorder is moved excessively or quickly
• If subject is moving rapidly even when the DVD Palmcorder is not moving

Switching Quality of Still Image (Quality)
You can switch the still recording quality only when using card.
1 Press the MENU button,
choose “Quality” on the
“Record Functions
Setup” menu screen, and
then press the 
button.
2 Choose the option you want, and then press the
 button.
3 Press the MENU button
to end the setting.
Note:
The still quality setting will be stored in memory even when
the DVD Palmcorder is turned off.
It is recommended that you use “FINE” when recording vital images.
(Image when block-like noise occurs) (Image without block-like noise)
Record Funct ions Setup
NORM
ECO
FINE
Quality
PHOTO Input
Se l f T i mer
OSD Ou t p u t
Input Source
ENTER RETURN
999
REM
NORM
8 : 00AM
SEP
30 2003
Still recording quality
VDR-M30PP_GB.book Page 89 Friday, March 14, 2003 8:53 PM