1
Press the MEMORY button.
[■ QUICK DIAL] menu appears on the monitor screen.
2
Enter a quick dial number by pressing the numeric buttons.
• Enter a desired number from 001 to 200.
• When the ENTER button is pressed after entering the quick dial number,
then the registered quick dial numbers are shown in the Directory column.
• A quick dial number can also be selected by moving the cursor to the num-
ber in the Directory column and pressing the ENTER button. An item can
be selected using the [▲] or [▼] button.
• An input quick dial number can be corrected using the DELETE button. (It
cannot be corrected after pressing the ENTER button.) The character
immediately preceding the cursor is deleted when the DELETE button is
pressed.
■ Calling a Site by Quick Dialing
Using a MEMORY button, the corresponding site can be called without directly entering the telephone number.
Quick dial No. 000 is exclusive for sequential dialing. For details, refer to section [■ Calling One Site After Another by
Sequential Dialing].
To Next Page
Loading...
