Panasonic WJ-AV20

81
Product name Model name Q’ty*
1
Remarks
Controller
CCTV camera
WJ-CU20E
Ask the sales agent of
our service people.
Only one combination camera can be connected
to the “video input connector 1.”
1
5 units max.
CCTV monitor
Ask the sales agent of
our service people.
Usage is possible with a quad unit or frame
switcher, etc.
Depends on sys-
tem configuration
Quad unit
Ask the sales agent of
our service people.
Required when transmitting synthetic images for 4
screens.
Depends on sys-
tem configuration
Time-lapse VCR
Ask the sales agent of
our service people.
Required when recording images during commu-
nication.
Depends on sys-
tem configuration
Coaxial cable
(with BNC connector)
Locally purchased
Required when connecting a camera or such a
unit. Regarding the cable size and length, refer to
the instruction manual for the camera being used.
Depends on sys-
tem configuration
Audio cable Locally purchased
Required when connecting the RCA-connector-
attached unit, such as audio unit, monitor, etc.
Depends on sys-
tem configuration
Alarm/trigger cable Locally purchased
Required when connecting a sensor or a switcher
provided with a remote connector. The cable
length, wiring, and the connector shape at the
communication terminal end can differ according
to the system configuration.
1
*1: The quantity is applicable when this unit is used in direct connection with a single AV Codec Unit.
Note: If the use has no contract for an ISDN line, it is necessary to conduct separate proceedings. This unit does not include
the DSU (Digital Service Unit). The DSU is needed separately. The DSU to be used should be qualified to be an electric
communications terminal unit.
OPTIONAL ACCESSORIES