Panasonic WJ-AV20

37
● Sequential Dialing Methods [330]
This menu lets you select the sequential dialing methods as shown below.
• Quick Dial Number of the destination where the sequential dialing is to begin.
• Communication time per destination.
• Enables or disables repeated sequential dialing.
Sequential dialing is valid for the destinations that are set to ON on the SEQ. DIAL parameter in the directory.
330 SEQ.DIAL
START UP SEQ.DIAL: ...
COM TIME:
10S 20S 30S 1M 5M MANUAL
REPEAT : YES NO
SEQ. DIAL IS AVAILABLE FOR SEQ.ON
REG. IN DIRECTORY
↑↓ :MOVE ←→:SELECT ESC:PRV
1
Move the cursor to the desired item
parameter and select an item mode by
pressing the Direction buttons.
The selected parameter will be underlined in the menu
when the cursor is moved to another item parameter by
pressing the ▲ or ▼ button.
• START UP SEQ. DIAL
Enter the quick dial number of the destination where the
sequential dialing is to begin by pressing the Numeric
buttons.
• COM TIME
Select a desired monitor time for the destination by
pressing the Direction buttons.
Select [MANUAL] when the sequential dialing is operat-
ed manually.
• REPEAT
ON: Enables sequential dialing repeatedly until it is ter-
minated by pressing the DIAL button.
OFF: Quits sequential dialing upon completion of a
round.
2
Press the ESC button to return to the
previous [300 DIRECTORY / REGI.] menu.