Panasonic WV-SP300 Series

41
Configure the settings relating to images and
audio [Image/Audio]
The settings relating to JPEG, H.264 and MPEG-4 images such as the settings of image quality, audio, etc. can be
configured on this page.
The "Image/Audio" page has 3 tabs; the [JPEG/H.264] tab (or [JPEG/MPEG-4] tab), the [Image/Privacy] tab and the
[Audio] tab.
Configure the settings relating to the aspect ratio [JPEG/H.264]
Click the [JPEG/H.264] tab on the "Image/Audio" page. (☞ Pages 22 and 23: How to display/operate the setup
menu)
[Aspect ratio]
Select "4:3" or "16:9" for the aspect ratio.
Default: 4:3
Note:
 • Unlessotherwisedescribed,otherPanasonici-PRO
Series products do not support the aspect ratio of
16:9andtheimagecapturesizeof"800x600".(as
of June 2010)
 • "800x600"and"16:9"areunavailableforthe
MPEG-4 images.
 • Whenselecting"16:9"for"Aspectratio","H.264"is
automatically set for "Video encoding format".
 • Imageadjustmentfunctionsareactivatedforthe
angle of view in the aspect ratio of 4:3 even while
"16:9" is being selected for "Aspect ratio". When
setting the mask area for the back light compensa-
tion (BLC) function, it is recommended to configure
the setting after selecting "4:3" for "Aspect ratio".
■ JPEG
Configure the settings such as "Refresh interval
(JPEG)*", "Image capture size" and "Image quality" on
this section. Refer to page 42 and 46 for further infor-
mation about the settings relating to H.264 (or MPEG-4)
images.
[Refresh interval (JPEG)*]
Select an interval to refresh the displayed JPEG image
from the following.
0.1fps/ 0.2fps/ 0.33fps/ 0.5fps/ 1fps/ 2fps/ 3fps/ 5fps/
6fps*/ 10fps*/ 12fps (PAL models)*/ 15fps*/ 30fps*
Default: 5fps
Note:
 • When"On"isselectedfor"H.264transmission"(or
"MPEG-4 transmission"), the refresh interval may be
longer than the set value when any value with an
asterisk (*) on the right is selected.
Configure the settings relating to JPEG images [JPEG/H.264] (or [JPEG/
MPEG-4])
Click the [JPEG/H.264] tab (or [JPEG/MPEG-4] tub) on the "Image/Audio" page. (☞ Pages 22 and 23: How to dis-
play/operate the setup menu)