Panasonic WV-SP300 Series

42
[Video encoding format]
Select "H.264" or "MPEG-4" for the video encoding for-
mat.
H.264: H.264 will be set for the video encoding format.
The subsequent setting items will be for H.264. The
tab name will be changed to [JPEG/H.264].
MPEG-4: MPEG-4 will be set for the video encoding
format. The subsequent setting items will be for
MPEG-4. (☞ Page 46) The tab name will be
changed to [JPEG/MPEG-4].
Default: H.264
■ H.264(1) · H.264(2)
[H.264 transmission]
Select"On"or"Off"todeterminewhetherornotto
transmit H.264 images.
On: Transmits H.264 images.
Off: Does not transmit H.264 images.
Default:On
Note:
 • When"On"isselectedfor"H.264transmission"in
"H.264(1)", displaying of both H.264 images and
JPEG images on the "Live" page will become avail-
able.
 • When"On"isselectedfor"H.264transmission"in
"H.264(1)" and "H.264(2)", H.264 images are view-
able using other devices with each setting.
Configure the settings relating to H.264 images [JPEG/H.264]
Click the [JPEG/H.264] tab on the "Image/Audio" page. (☞ Pages 22 and 23: How to display/operate the setup
menu)
[JPEG/H.264] tab will be displayed when "H.264" is selected for "Video encoding format".
ConfigurethesettingsrelatingtoH.264imagesuchas"Maxbitrate(perclient)","Imagecapturesize","Image
quality", etc. in this section.
Refer to page 46 and 41 for the settings relating to MPEG-4 images and JPEG images respectively.
[Image capture size (Initial display)]
Select the image capture size to display the JPEG
image on the "Live" page for the first time.
When "4:3" is selected for "Aspect ratio"
QVGA/VGA/1280x960*
1
QVGA/VGA/800x600*
2
When "16:9" is selected for "Aspect ratio"
320x180/640x360/1280x720*
1
320x180/640x360*
2
Default: 1280x960*
1
VGA*
2
[Image quality]
Select image quality of JPEG images from the follow-
ing.
0 Super fine/ 1 Fine/ 2/ 3/ 4/ 5 Normal/ 6/ 7/ 8/ 9 Low
Default: 5 Normal
*1
SP306
SP305
SF336
SF335
*2
SP302
SF332