Panasonic WV-SP300 Series

64
[AUX (Up to 10 characters)]
Enter the name for "AUX" on the "Live" page.
Default: AUX
[Open (Up to 5 characters)]
Enterthenamefor"Open"of"AUX"onthe"Live"page.
Default:Open
[Close (Up to 5 characters)]
Enter the name for "Close" of "AUX" on the "Live"
page.
Default: Close
Note:
 • AUXisacameraterminalthatallowsuserstooper-
ate(Open/Close)arbitrarilyfromthe"Live"page.
Forexample,anoperatorcanremotelycontrollights
in a place where the camera is installed by connect-
ing the terminal to the light controller.
Change the AUX name [Alarm]
Click the [Alarm] tab on the "Alarm" page. (☞ Pages 22 and 23: How to display/operate the setup menu)
Thenamesof"AUX","Open"and"Close"onthe"Live"pagecanbechanged.