Panasonic WV-SP300 Series

26
Configure the basic settings of the camera [Basic]
The basic settings such as camera title, time and date, SD memory card and the logs can be configured on the
"Basic" page.
The "Basic" page has 3 tabs; the [Basic] tab, the [SD memory card] tab and the [Log] tab.
Configure the basic settings [Basic]
Click the [Basic] tab on the "Basic" page. (☞ Pages 22 and 23: How to display/operate the setup menu)
The settings such as the camera title, time and date, etc. can be configured on this page.
[Camera title]
Enter the title of the camera. Click the [Set] button after
entering the title of the camera. The entered title will be
displayed in the status display area.
Available number of characters: 0 - 20 characters
Default: Varies as follows depending on the model in
use.
WV-SP306
WV-SP305
WV-SP302
WV-SF336
WV-SF335
WV-SF332
[Date/time]
Enter the current time and date. When "12h" is selected
for "Time display format", "AM" or "PM" can be
selected.
Available range: 01/01/2010 00:00:00 - 31/12/2035
23:59:59
Important:
 • UseanNTPserverwhenthemoreaccuratetime&
date setting is required for the system operation.
(☞ Page 77)
[Time display format]
Select the time display format from "12h", "24h" and
"Off".Enterthecurrenthourreflectingthissettingwhen
entering the current time and date for "Date/time". To
hidetimeanddate,select"Off".
Default: 24h
[Date/time display format]
Select a date/time display format.
When "2010/04/01 13:10:00" is set for "Date/time" after
selecting "24h" for "Date/time display format", time and
date will be respectively displayed as follows.
DD/MM/YYYY: 01/04/2010 13:10:00
MM/DD/YYYY: 04/01/2010 13:10:00
DD/Mmm/YYYY: 01/Apr/2010 13:10:00
YYYY/MM/DD: 2010/04/01 13:10:00
Mmm/DD/YYYY: Apr/01/2010 13:10:00
Default: DD/MM/YYYY (PAL model)
Mmm/DD/YYYY (NTSC model)
[Summer time (daylight saving)]
Select"In"or"Out"todeterminewhetherornotto
apply daylight saving time. Configure this setting if the
summer time (daylight saving time) is applied in the
location where the camera is in use.
In: Applies summer time. An asterisk (*) will be dis-
played on the left side of the displayed time and
date.
Out: Does not apply summer time.
Default:Out
[Camera title on screen]
Select"On"or"Off"todeterminewhetherornottodis-
play the camera title on the screen.
When"On"isselected,thecharacterstringenteredfor
"Camera title on screen (0-9, A-Z)" will be displayed at
thepositionselectedfor"OSDposition".
Default:Off