Panasonic WV-SP300 Series

5
Abbreviations
The following abbreviations are used in these operating instructions.
Microsoft
®
Windows
®
7 Professional (64-bit) and Microsoft
®
Windows
®
7 Professional (32-bit) are described as
Windows 7.
Microsoft
®
Windows Vista
®
Business SP1 (32-bit) is described as Windows Vista.
Microsoft
®
Windows
®
XP Professional SP3 is described as Windows XP.
Windows
®
InternetExplorer
®
8.0, Windows
®
InternetExplorer
®
7.0 and Microsoft
®
InternetExplorer
®
6.0 are
describedasInternetExplorer.
SDHC/SD memory card is described as SD card or SD memory card.
Viewer software
It is necessary to install the viewer software "Network Camera View 4" to display images on a PC. This software
canbeinstalleddirectlyfromthecameraorbydoubleclicking"nwcv4setup.exe"ontheCD-ROMprovided,and
then following the on-screen instructions.
Important:
 • Thedefaultsettingof"AutomaticinstallationofViewersoftware"is
"On".Followtheinstructionsonpage99whenthemessageisdis-
played on the information bar of the browser.
 • Whenthe"Live"pageisdisplayedforthefirsttime,theinstallwiz-
ard of the ActiveX control required to display images from the cam-
era will be displayed. Follow the instructions of the wizard.
 • Whentheinstallwizardisdisplayedagainevenaftercompleting
the installation of the ActiveX, restart the PC.
 • TheviewersoftwareusedoneachPCshouldbelicensedindividu-
ally. The number of installations of the viewer software from the
camera can be checked on the [Upgrade] tab of the "Maintenance"
page (☞ page 88). Refer to your dealer for the software licensing.