Panasonic WV-SP300 Series - Page 56

56
[Area]
The privacy zone will be set when an area is designated
by dragging the mouse. Each zone can be overlapped.
Up to 2 privacy zones can be created.
[Display type]
Select a display type of the privacy zone from the fol-
lowing.
Gray: The privacy zones will be displayed in gray.
Off: Does not display the privacy zones.
Default:Off
Note:
 • Settheprivacyzonelargerthanthesizeofan
object to be hidden.
[Close] button
Click this button to close the "Privacy zone" setup
menu.
Configure the settings relating to the privacy zone (Privacy zone setup menu)
Clickthe[Setup>>]buttonof"Privacyzone"onthe[Image/Privacy]tabofthe"Image/Audio"page.(☞ Page 49)
When there is a zone that is not to be displayed, set the zone as a privacy zone to not to display. Up to 2 privacy
zones can be set.