MECHANICAL INSTALLATION
22 IPA Hardware Installation Guide
Weight
The following table lists the weight of each drive/controller model.
Drive/Controller Weights
Mounting Guidelines
The IPA is a vented product. To prevent material spilling into the drive, mount it under an overhang or in a
suitable enclosure.
IPA products are made available under “Restricted Distribution” for use in the “Second Environment” as described
in the publication EN 61800-3 ed2.0.
Cable Routing
Route high power cables (motor and mains) at right angles to low power cables (communications and
inputs/outputs). Never route high and low power cables parallel to each other.
To Next Page
Loading...
