Parker IPA-15HC - Input Power Level; Output Power Level; Servo Motor Drives; Components

INTRODUCTION
16 IPA Hardware Installation Guide
Input Power Level
Model Number
Description
Motor Input Power
IPA04-HC, IPA-15HC
120/240 VAC single-phase mains motor input power
Control Input Power
IPA04-HC, IPA-15HC
120/240 VAC single-phase mains motor input power
Output Power Level
Servo Motor Drives
In the following table, the maximum current is given at 120/240 VAC input, which equates to a motor bus voltage
of 170/340 VDC.
Output Power Level
Model
Continuous Shaft
Output Power
(Watts)
Continuous
Current
(RMS)
Peak Current
(RMS)
IPA04-HC
400
3.00
9.00
IPA15-HC
1500
6.30
18.90
Components
For information about cables, motors, and other motion-control-system components see “Chapter 2 Mechanical
Installation” on page 18.
Options
For the latest additions, see our website at www.parkermotion.com.