ELECTRICAL INSTALLATION
42 IPA Hardware Installation Guide
Output (Motor) Power
Output Power Ratings
Continuous and peak output power ratings for all IPA models are listed in the following table.
Output Power Ratings
Output (Motor) Power Connections
The following figure shows how to connect the motor cable to the Output Power connector.
Figure 13. - Output Power Connection
Current Parker motor cables are marked with white numbers (1, 2, or 3) to indicate the phase. Connect Motor
Phase 1 to U, 2 to V, and 3 to W, and Motor Safety Earth to the Protective Earth ground connector.
Warning: You must connect the Motor Safety Earth conductor terminal,
marked with the earth symbol , to the motor cable’s motor-
safety-earth wire green/yellow).
The following table contains wiring information for making connections with various Parker Hannifin motors.
Wiring to Parker Motors
To Next Page
Loading...
