26
2.2 Hardness tester buttons
In the "Measurements" tab, the , , , buttons perform the following
functions:
The button allows you to select the calibration scale for a given material.
The button allows you to select the measurement scale to which you want to
convert values.
The button is used to select the direction of the probe.
The button is used to enter the number of measurements.
In other tabs, the buttons perform the following functions:
The button are used to move up / down the tabs of the hardness tester and enter data.
The buttons are used to move up / down the tabs of the hardness tester and enter
data.
The button allows you to enter data.
The buttons are used to move left / right on the tabs of the hardness tester and data
entry.
The button allows you to switch between the main tabs of the device and enter data.
The button allows you to enter data.
The button allows you to enter data.
The button allows you to make a space, put a period, comma, dash or enter the
desired data.
The button is used to cancel the action, to delete one or more graphic characters,
to return to the previous tab.
The button is used to select an item in the tab, submit a command, confirm an
action or user readiness.
To Next Page
Loading...
Need help?
General