PCE Instruments PCE-3000ULS - Language and Brightness Settings

54
Figure 2.55 - "Save the series" tab window
2.9.4 Probe type
On this tab, you can select from four different probe types: Type D probe, G probe, E
probe, and UCI probe.
To enter the tab, use the buttons to select "Sensor type" and press . A
window will open (Fig. 2.56), where you need to use the buttons , to select the type
of probe. Once the probe type is selected, press the button and the desired probe will be
selected.
Figure 2.56 - "Sensor type" tab window