Need help?Do you have a question about the PCE Instruments PCE-3000ULS and is the answer not in the manual?
General| Brand | PCE Instruments |
|---|---|
| Model | PCE-3000ULS |
| Category | Test Equipment |
| Language | English |
Explains the intended use and application scope of the PCE-3000ULS hardness tester for metal products.
Details the dynamic and ultrasonic methods used by the hardness tester for measurement.
Outlines the various measurement scales and capabilities of the hardness tester.
Provides key technical data including measuring ranges, accuracy, and operating conditions.
Describes the different types of probes available for the hardness tester and their applications.
Lists optional equipment that can supplement the hardness tester's functionality.
Specifies product criteria such as weight, thickness, and surface roughness for accurate measurement.
Guidance on measuring materials with properties distinct from standard carbon steel.
Details the criteria for samples used in calibrating or adjusting the hardness tester.
Instructions for performing measurements on light and thin-walled materials.
Methods to mitigate measurement errors caused by rough product surfaces.
Explains how coatings and hardened layers affect measurement accuracy.
Procedures for measuring the hardness of reinforced surface layers on materials.
Lists the standard and optional components included with the hardness tester.
Provides an overview of the electronic unit's front panel and body schematics.
Instructions on how to properly handle and use the UCI probe for measurements.
Guidelines for setting up and operating the Rebound Leeb probe for hardness testing.
Steps to prepare the device and turn it on before starting measurements.
Explanation of the functions of various buttons on the hardness tester.
Instructions on navigating between the different tabs of the hardness tester interface.
Covers calibration selection, scale conversion, probe direction, and measurement count settings.
Details on accessing and viewing previously saved measurement data.
Overview of standard, custom, and one-point calibration methods.
Information on the default calibration and its adjustment options.
Guidance on creating, editing, and deleting custom calibration scales.
Procedure for performing a single-point calibration for specific materials.
Covers device settings like date, time, probe type, language, and brightness.
Instructions for setting the device's date and time.
Enabling or disabling the automatic recording of measurement series.
Guide to selecting the appropriate probe type (D, G, E, UCI).
Adjusting the interface language and display backlight brightness.
Procedures for changing the user password and configuring sound confirmations.
Configuring device power-off timers and USB connectivity to a PC.
Accessing service functions and changing measurement statistical modes.
Displays information such as probe gain, calibration error, and firmware version.
Information on device identification markings and factory packaging.
To Next Page