8
protection against dust and moisture.
Hardness tester during measurements allows calculating the average value of a series
of results of measurements and filtering incorrect measurements that are out of range.
Hardness tester during measurements allows to carry out additional statistical
processing of a series of results of measurements - search of the minimum, maximum values,
calculation of average value, construction of graphs and display of data in the form of the
table.
Hardness tester during measurements allows you to display additional information –
previous measurement results.
The device allows you to organize the data archive in the form of nominal blocks of
measurement results, save it when the power is off and transfer data to a computer.
Allows to carry out various types of the analysis of the saved results of measurements,
to carry out the construction of various types of graphs directly on the device display.
The hardness tester allows selecting the information which is in addition displayed on
the device display in the course of measurements.
The hardness tester constantly displays the battery charge status and signals its
discharge during operation.
The device allows you to set the time of automatic shutdown of the device during
pauses in its operation to further save battery power.
The hardness tester allows you to choose the type of probe.
Allows you to adjust the display backlight mode to further save battery power.
The hardness tester allows you to set the backlight brightness of the display.
Allows you to select the language of the interface.
To Next Page
Loading...
Need help?
General