Flat Bed Foil Printer User Guide
Peleman Industries
Depending on the medium that you will print on, use the acrylic plate or the foam pad. You
don’t need to remove one of the two completely. However, for some materials the result
will be better when only one of two is being used on the aluminium printing table.
The underlay materials (acrylic sheet and foam pad) give the best support for the most
known materials. Replace them for new on regular basis.
Use acrylic plate on top when printing on:
Smooth paper*, clear covers, flex covers and other bendable material. You also can use
acrylic plate to glue materials like leather with double sided tape sheets.
*Use extra paper sheets as underlay when printing on paper.
Use foam pad in top when working with:
Hard covers, thick acrylic sheets and other hard, stiff materials.
Figure 8: Use Supplied Underlay Materials for Different Applications
To Next Page
Loading...