Peleman Flat Bed Foil Printer - Foil Handling; 4.1 About The Foil

Flat Bed Foil Printer User Guide
Peleman Industries
17
Use double paper clamp
Recently we started to add a paper clamp in the package (item UFPR0000021). You can
use it to fasten your substrate. It can be used as a clamp to hold the substrate or as an end
stop to avoid covers from moving during printing.
Attention: be careful with printing near the edge. Printhead can touch the clamp and get
damaged.
Figure 9: Different possibilities to use double paper clamp to hold the substrate