Flat Bed Foil Printer User Guide
Peleman Industries
To move the cursor to the lower line in the selected text box, when text
editing is active
To move down the selected element / selected print area, when text
editing is not active
To move the cursor at end of current line in the selected text box
To add a new line of text in the selected text box
To move the cursor at the start of current line in the selected text box
To move the cursor left in the selected text box, if text editing is active
To move left the selected element / selected print area, if text editing is
not active
To zoom out a single step (Works only if no element in the design area is
selected)
To zoom in a single step (Works only if no element in the design area is
selected)
To move the cursor right in the selected text box, when text editing is
active
To move right the selected element / selected print area, when text
editing is not active
Select text from current cursor location till same location in lower line in
the selected text box
Select text from current cursor location till end of line in the selected
text box
Select text from current cursor location till start of line in the selected
text box
Select character at left of cursor in the selected text box
Select character at right of cursor in the selected text box
Select text from current cursor location till same location in upper line in
the selected text box
To move the cursor on the upper line in the selected text box, when text
editing is active
To move up the selected element / selected print area, when text editing
is not active
If text editing is enabled, then select the associated text design element
To Next Page
Loading...