Install Drivers for 9000 Boards
18
Baud Rate
Baud rate is fixed at 19200 for DMC9000.
Detect
Detect the connected port only if it is COM1 or
COM2.
Advance
This detects COM1 to COM4 port, detecting the
COM port and IRQ number in sequence. Note that
you must close all other programs running before
you select this function.
User Define
Lets you input this data from your keyboard.
Calibrate
This item provides the Initial and Calibration functions.
Initial
This button conveniently re-establishes connection
with the control board if the RS-232 serial port
becomes disconnected.
Calibration
This button maps the touch panel to the display. Click
Calibration and touch the five points in sequence to
calibrate.
To Next Page
Loading...
